SM Ø 12 - Medium load - Special Springs

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13

		LINA Bill of material	CODE - ⁿ/ₐ	DO Hole diameter [mm]	DI Rod diameter [mm]	LO Free length [mm]	RG Rate /±10% [N/mm]	FX Force [N]	LX Length at compression end [mm]	S1 Recommended working deflection for long spring life [mm]	F1 Force [N]	S2 Recommended working deflection for medium spring life [mm]	F2 Force [N]	SN Maximum operating deflection [mm]	FN Force [N]	SB Solid deflection [mm]	MAT Material ⁿ/ₐ	BXH Cross wire section [mm]	H Cross wire section [mm]

		SM12-020	SM12-020	12.0	6.0	20	44.4	0.000	20.000	5.1	226	5.8	255	6.4	284	7.6	Cr-Si	2,90 x 1,40	1.400
		SM12-025	SM12-025	12.0	6.0	25	35.5	0.000	25.000	6.4	226	7.2	255	8.0	284	9.5	Cr-Si	2,90 x 1,40	1.400
		SM12-030	SM12-030	12.0	6.0	30	29.6	0.000	30.000	7.7	226	8.6	255	9.6	284	11.4	Cr-Si	2,90 x 1,40	1.400
		SM12-035	SM12-035	12.0	6.0	35	25.3	0.000	35.000	9.0	226	10.1	255	11.2	284	13.3	Cr-Si	2,90 x 1,40	1.400
		SM12-040	SM12-040	12.0	6.0	40	22.3	0.000	40.000	10.2	226	11.5	255	12.8	284	15.2	Cr-Si	2,90 x 1,40	1.400
		SM12-045	SM12-045	12.0	6.0	45	19.7	0.000	45.000	11.5	226	13.0	255	14.4	284	17.1	Cr-Si	2,90 x 1,40	1.400
		SM12-050	SM12-050	12.0	6.0	50	17.8	0.000	50.000	12.8	226	14.4	255	16.0	284	19.0	Cr-Si	2,90 x 1,40	1.400
		SM12-055	SM12-055	12.0	6.0	55	16.1	0.000	55.000	14.1	226	15.8	255	17.6	284	20.9	Cr-Si	2,90 x 1,40	1.400
		SM12-060	SM12-060	12.0	6.0	60	14.8	0.000	60.000	15.4	226	17.3	255	19.2	284	22.8	Cr-Si	2,90 x 1,40	1.400
		SM12-065	SM12-065	12.0	6.0	65	13.6	0.000	65.000	16.6	226	18.7	255	20.8	284	24.7	Cr-Si	2,90 x 1,40	1.400
		SM12-070	SM12-070	12.0	6.0	70	12.7	0.000	70.000	17.9	226	20.2	255	22.4	284	26.6	Cr-Si	2,90 x 1,40	1.400
		SM12-075	SM12-075	12.0	6.0	75	11.8	0.000	75.000	19.2	226	21.6	255	24.0	284	28.5	Cr-Si	2,90 x 1,40	1.400
		SM12-080	SM12-080	12.0	6.0	80	11.1	0.000	80.000	20.5	226	23.0	255	25.6	284	30.4	Cr-Si	2,90 x 1,40	1.400